Livraison offerte dès 89€ d'achat en point relais
Tungsten stud MX25 M10 MICHEL VAILLANT
0/5
Protrusion 17,5 mm - grip *** - slippery ground - sand.
Référence : 37000447-0108-2
€34.00
€34.00
Exceeding
Quantity
En stock
Grip *** - slippery ground - sand
Shoe thickness 8 or 10 mm. Oval head 17 mm diameter, 12 mm wrench, protrusion : 17.5 mm out of the shoe. Drill Ø 8.5 mm and use a metric screw tap M10x150. Weight 20 g.
Grip *** - slippery ground - sand
Shoe thickness 8 or 10 mm. Oval head 17 mm diameter, 12 mm wrench, protrusion : 17.5 mm out of the shoe. Drill Ø 8.5 mm and use a metric screw tap M10x150. Weight 20 g.
Category M10 threaded studs for saddle horses Brand Michel Vaillant
Les avis sur notre produit
Comments (0)
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent
Vous aimerez aussi...
Mini tungsten stud box M10 MICHEL VAILLANT
8 studs MX10 & MX50, 8 plugs FM10, hexago. key 5 mm, 1 T tap M10.
€73.00 €73.00
Fastuds® foam plugs MICHEL VAILLANT
To prevent from dirt in the studs holes. pad of 50 plugs.
€7.10 €7.10
Tungsten stud MX19S W3/8 MICHEL VAILLANT
Protrusion 13,5 mm - grip ** - Very hard ground.
€34.00 €34.00
Fastuds® kit hard ground HG metric M10 MICHEL VAILLANT
8 Fastuds® HG10 + 8 Fastuds® HG14 + 1 key + 50 foam plugs
€80.00 €80.00
"T" tap MICHEL VAILLANT
Flat wrench 10 and 12 mm for square or oval head stud + repair tap.
€18.00 €18.00