Backstand

Economic model with a fixed, lean and fully efficient backstand. Stationary belt sander specialized in cutlery, dedicated to all stages of manufacturing and finishing of handmade blades and handles of handcrafted knives.

Precision stationary belt sander specially developed for cutlery, the production of blades, and handles for artisanal knives in all phases, from manufacturing to finishing.

This system allows the Backstand Knife Maker MV2020-1 to be tilted to work flat. (Horizontal handrest table).The complete system is mounted in replacement of 4 pre-existing fixing screws. The mounted backstand can be tilted at 90° by simply unlocking a screw handle. Pre-positioning vertical or horizontal is done in a stop on one side or the other. The feet attach to the base plate, which is also pre-drilled to accommodate the system.Comes with 280mm wide orbital hand rest table with wheel notch 100 and 300 of diameter.

Anodizing colorization supplement.Be aware: this product is an anodizing colorization supplement for the casing of your Backstand MV2020-1 and not the backstand itself.

The contact wheel is an additional tooling for the Backstand Knife Maker MV 2020-1. Provided with a vulcanized caoutchouc coating around it, with a hardness of 70 Shore D. If necessary, it can be provided with a notched coating, except the 38 mm version. This wheel is assembled on a high-speed precision ball bearing and can be directly installed to replace the planning table.

Equipment specifically intended for sharpening, ideal for finishing touches and maintenance of your knives. 420 W of power.

Mixed sanding + polishing machine to be mounted on a workbench. 220 V mono. 480W. Wheel 150 mm of dia for 50x800 belts + buffing.

Sanding backstand mounted on a stand, using 50 x 2000 mm abrasive belts. 1.1 kW (1.5 hp) motor - 220 volts single-phase or 400 volts three-phase.

Optimal sanding results, thanks to a high belt rotation speed.