Livraison offerte dès 89€ d'achat en point relais

Renette Sharpener - Backstand 800C

0/5

Grinding machine 800C

Référence : BACKSTAFFUTRENETTE
€699.00
€699.00
Sur commande ou attente de réapprovisionnement
Partager

Partager le lien

Machine specifically intended for sharpening.

Sharpening machine specially adapted for renettes, which can also be used for knives and other blades.

- Direction of rotation of the belt reversed to visualize the sharpening.

- Band 50x800 mm for sharpening the blades.

- Narrow band 25x800mm which facilitates sharpening of curved blades. Ideal for foxes.

- Contact wheel, loose belt part and leveling table.

- Belt speed 15 m / second.

- Felt disc diameter 175 mm to remove the burr and maintain your blades.

- Disk speed 2860 rpm.

Technical characteristics :

- Dimensions: Width. 250 x prof. 450 x h. 200 mm.

- Supply voltage: 220 Volts single phase.

- Power: 420 W.

- Disc speed: 2860 rpm.

- Belt speed: 15 m / second.

- Contact wheel: diameter 100 mm.

- Felt disc: diameter 175 mm.

- Band: 50x800 and 25x800 mm.

- Weight: 10.5 kg.

BACKSTAND 800C SHARPENER delivered with:

- 1 Band 25x800 mm Norax X45 Finishing grain.

- 1 Band 50x800 mm Norax X45 Grain finish.

- 1 Felt pad 175 mm.

- 1 Polishing bar for sharpening renettes and knives.

Warning this machine is not a belt sander for material removal.

It is only intended for sharpening.

Use other than its sharpening function may damage the motor.

Note: The first photo is not completely faithful to the product and will be replaced soon.

Machine specifically intended for sharpening.

Sharpening machine specially adapted for renettes, which can also be used for knives and other blades.

- Direction of rotation of the belt reversed to visualize the sharpening.

- Band 50x800 mm for sharpening the blades.

- Narrow band 25x800mm which facilitates sharpening of curved blades. Ideal for foxes.

- Contact wheel, loose belt part and leveling table.

- Belt speed 15 m / second.

- Felt disc diameter 175 mm to remove the burr and maintain your blades.

- Disk speed 2860 rpm.

Technical characteristics :

- Dimensions: Width. 250 x prof. 450 x h. 200 mm.

- Supply voltage: 220 Volts single phase.

- Power: 420 W.

- Disc speed: 2860 rpm.

- Belt speed: 15 m / second.

- Contact wheel: diameter 100 mm.

- Felt disc: diameter 175 mm.

- Band: 50x800 and 25x800 mm.

- Weight: 10.5 kg.

BACKSTAND 800C SHARPENER delivered with:

- 1 Band 25x800 mm Norax X45 Finishing grain.

- 1 Band 50x800 mm Norax X45 Grain finish.

- 1 Felt pad 175 mm.

- 1 Polishing bar for sharpening renettes and knives.

Warning this machine is not a belt sander for material removal.

It is only intended for sharpening.

Use other than its sharpening function may damage the motor.

Note: The first photo is not completely faithful to the product and will be replaced soon.

Category Trimming hooves Brand Scantool

Les avis sur notre produit

Comments (0)

Vous aimerez aussi...